ANATHERM Heat Treatment Units

ANATHERM Heat Treatment Devices - Mobile and Reliable

ANATHERM SERIES heat treatment units ensure accurate, professional preheating and heat treatment anywhere and under all conditions.

 ANATHERM heat treatment units are portable units with temperature programmers, temperature recorders, power supply and control system. They are designed to work under difficult conditions in construction sites and factories. The low-cost units at 45 kW, 70 kW, 82 kW, 100 kW and 130 kW outputs, have 0V, 30V and 60V seconder outputs. This makes it an ideal device for easy and fast heat treatment (PWHT) after welding and preheating. The units are state-of-the-art, easy to use, versatile and reliable. ANATHERM heat treatment units can be used safely in all areas and stages of heat treatment.

  • Mobile, robust, waterproof housing                                                                        
  • Three-phase transformer with forced cooling
  • Power transformer overheating protection
  • Ground short circuit protection
  • Door safety switch
  • Power ratings from 45 kW to 130 kW
  • Constant output voltage (0/30/60 V)
  • Temperature recording with temperature printers
  • Temperature control with automatic program controller
                                                       

Technical Specifications:

 

HT

45-6

HT

70-6/12

HT

82-6

HT

82-12

HT

100-12

HT

130-6/12

 

Outouts

Heating/Control zone

6

6 or 12

6

12

12

6 or 12

 

Current switching for each zone

125 A

180/90 A

227 A

6x90/135 A

135 A

360/180 A

 

Voltage switching for each zone

30 / 60 VAC

100% working capacity

45 kW

70 kW

82 kW

82 kW

100 kW

130 kW

 

Fuse per zone

125 A

180/100 A

250 A

6x100/125 A

125 A

335/200 A

 

Conrtol voltage

Supply

400V/230 V, 50/60 Hz. trafo

Load voltage

Load connection

400V, 63A

500V, 52A

400V, 95A

500V, 75A

400V, 119A

500V, 95A

400V, 119A

500V, 95A

400V, 145A

500V, 116A

400V, 188

500V, 151A

Cable cross section

                      Lenght

                      Socket

4x16 mm²

5 m

CEE Socket 5 pin 400V/63A

4x35 mm²

5 m

CEE Socket

5 pin

400V/63A

4x70 mm²

5 m, the device side will be connected directly to the main contactor and the other side will be mounted for permanent connection between the customer network

Temperature control

Temperature sensor

K Type (NiCr-Ni)

Sensor socket

Standard thermocouple socket

Program kontrolör

6x AT120

6/12x AT120

6x AT120

12x AT120

6x AT120

6x AT120

Control range

-20 ~ +1200 ⁰C

Temperature recording

Recorder

AH4000-6/12 kaydedici

Record range

0 ~ +1200 ⁰C

Other features

Weight, kg

400

400/450

500

600

650

590/640

Dimension, mm (WxHxD)

800x1300x700

1000x1140x900

Protection class

IP 22

Environmental conditions

-20 ~ +50 ⁰C

75% relative humidity, non-condensing

Transformer cooling

Fan

Noise ratio

<70 dB (A)

 HEATING ELEMENTS

The heater elements are extremely robust and durable ceramic heater and are used in almost every application area. The heaters and energy cables are flexible and can be used in very small pipes. Round welds of pipes and containers, flange welds, longitudinal welds and surface heating etc. can be applied in processes.

HEATING ELEMENT FEATURES:

Structure                                : 1.95% Alumina ceramics

Heating wire                          : Cr20Ni80 37 * 0.4mm

Connection                             : Pure copper, high temperature resistant

Cold connecting wire             : Pure nickel wire

HEATING ELEMENT SIZES:

ORDER NR. 

WIDTH X LENGHT ( MM )

RATING ( KW ) 

CURRENT ( A ) 

VOLTAGE  ( V )

CP3-60V

75 x 724

2.7

45

60

CP4-60V

102 x 533

2.7

45

60

CP6-60V

152 x 368

2.7

45

60

CP8-60V

203 x 267

2.7

45

60

CP10-60V

254 x 229

2.7

45

60

CP12-60V

305 x 184

2.7

45

60

CP15-60V

380 x 146

2.7

45

60

CP18-60V

457 x 127

2.7

45

60

CP21-60V

535 x 102

2.7

45

60

CP24-60V

610 x 83

2.7

45

60

CP26-60V

740 x 83

2.7

45

60

CABLES: