Anatest Kalite Kontrol ve NDT Cihazları

A1270 EMA Ultrasonic Thickness gauge

A1270 is suitable for thickness gauging of pars from aluminum and its alloys without contact liquids. EMA transducers are not sensitive to the surface condition and also allow to work through coating or with an air gap.

Areas of application

Thickness measuring of parts from metals and alloys without any contact liquid
Testing of cellular constructions with aluminum plating
Evaluation of degree of corrosion or errosion in materials
Evaluation of degree of anisotropy
Testing of tensely-deformed condition of parts and units in engines

Features

The device is constructed to work with EMA transducers of SH waves, made by Acoustic Control Systems.

The results are shown in mm with accuracy of 0,01 mm. It can be stored in device memory and restored on-screen at any time. Accumulated data can then be tranferred to PC for archiving, backup or printing.

Graphical and text information are shown on LCD with LED illumination. LEMO connectors are used to connect the transducers.

small size and weight of the electronic unit and the trnaducers
extended range of measring thicknesses (0,5 - 100 mm for aluminum)
differnet types of EMA transducers (with radial polarization, with linear polarization)
works without contct liquids
different modes of the device operation: measurement, review, setup
easy to setup and use: calibration on material, automatic speed setup
automatic setup of basic transducers setting while calibrating
memory for 752100 measurements and 60 A-scans
conncetion with PC using a high-speed USB-port
low dependency of measurement results from surface condition
correlational signal processing
IP65 construction

Abilities

Extended device menu and several working modes allow to use the thickness gause to solve different testing problems.

SETUP mode

The different transducers types can be setup, their zero-procedure, calibration, material parameters, operations with configurations can be done in this mode.

MEASUREMENT mode

This mode allows to:

- measure thickness;

- detect minimal and maximum thickness values;

- write the results into memory, correct them or clear the memory

A specialized algorithm is used for thickness measuring, that can automatically adjust gain, choose the method of measurement and the discreteness of the information display. For operative analysis the display shows all the necessary information: method of measuring thickness, signal level, general information on testing parameters and previously written results.

REVIEW mode

This mode is sutable for measuring thickness while watching the form of the echo-signals. This allows to analyze the thickness measurement accuracy in difficult testing situations.

This mode allows to:

- measure thickness;

- choose one of three methods of thickness measurement (threshold, two echo-signals, ACF);

- ZOOM the received signals;

- write the A-scans with all the corresponding parameters into memory;

- work witl previously written frames.

Convinient and easy-to-use interface, which allows fast switching between modes and quick access to setups and functions, makes setup and use of device really simple and widens the testing possibilities.

Specification

Parameter	Value
Thickness measurement range(for stell)	from 1 to 50 mm
Thickness measurement range(for aluminum)	from 0,5 to 100 mm
Discreteness of measuring thickness:
- from 0,50 to 9,99	0,01 mm
- from 10,0 to 99,0	0,1 mm
Measuring error, not more than	±(0,5%+0,01/0,1) mm
Material velocity range	1000 - 9000 m/s
Working frequencies range	2,5-5,0 MHz
Quantity of objects in memory	752100 measurements and 60 A-Scans
Display type	LED display
Power supply (built-in rechargeable battery)	7,2 V
Operation time(with illumination)	10 (8) hours
Operating temperature range	from -20°С to +50°С
Size	245 х 120 х 40 mm
Weight of electronic unit	650 g